Were Rated Excellent In The Area
“Repair/replacement of roof”
Job location: GU15
“Complete Roof Replacement”
“This is the second large job Abel Roofing have completed for us in the last 12-months. Same high standard of workmanship and customer service. Cliff and his team are brilliant and we couldn’t recommend them highly enough.”
Job location: GU15
“Replacing flat roof after storm damage”
Job location: SW11
“A first rate job”
Job location: RG27
“Fantastic Service, Fantastic People”
Job location: SW4
What Is GRP Fibreglass Roofing?
GRP stands for glass reinforced plastic. It is a composite material made by layering fibreglass matting and resin to create a hard, rigid surface. Unlike felt or rubber membranes, GRP sets solid and forms a single continuous shell across the entire roof.
The finish is smooth, waterproof and resistant to cracking. It handles movement in the roof deck without splitting, and it does not degrade in UV light the way older roofing materials can. That is why it has become one of the go-to systems for residential flat roofing in the UK.
Abel Roofing uses GRP systems that are independently tested and approved. Every installation is carried out by trained roofers who understand the product and know how to apply it correctly.
What Does GRP Fibreglass Roofing Involve?
GRP roofing is a multi-step process that needs to be done right at each stage. Abel Roofing follows a proven method on every job to make sure the finished roof performs as it should.
The existing roof surface is inspected and, where necessary, stripped back. A new plywood deck is fitted if the substrate is not solid or level. The fibreglass matting is then laid and saturated with resin before a topcoat is applied to seal and protect the surface. Trim and edging are fitted to finish the roof cleanly and keep water directed away from the structure.
The whole process is typically completed within one to two days for a standard domestic roof. You get a finished roof that is hard, smooth and ready to handle whatever the weather throws at it.
Get A Free Quote
Take a look at our other Flat Roof To Pitched Roof Conversion Services here:

Why Invest in a Flat Roof to Pitched Roof Conversion?
If you have a flat roof, you already know the problems it brings. Leaks before winter, repairs every few years and the constant worry about what is going on up there. A pitched roof conversion ends that cycle.
A pitched roof is built to handle rain, wind and cold in a way a flat roof simply cannot match. Once it is on, it needs very little attention. The same cannot be said for a flat roof that is already showing its age.
There is also a financial case for it. Flat roofs are flagged by surveyors during house sales. Buyers ask questions and sometimes walk away. A pitched roof removes that risk and adds to the kerb appeal of your home.
Abel Roofing handles the full job. We manage the structural design, the build and the finish. You get one team, one point of contact and a roof that will not let you down.
Chimney Gallery
🛠️ Our GRP Fibreglass Roofing Locations 🛠️
Take a look at our GRP Fibreglass Roofing Locations here:
GRP Fibreglass Roofing Frequently Asked Questions
A GRP fibreglass roof installed correctly will typically last 30 years or more. The material does not degrade in sunlight, does not crack under normal movement and does not need regular retreatment to stay waterproof. Lifespan depends on the quality of the installation and the condition of the deck underneath.
For most domestic flat roofs, yes. GRP lasts significantly longer than felt, requires less maintenance and creates a seamless finish with no joins. Felt can still be a suitable option for straightforward budgets, but GRP offers better long-term value in most situations.
Cost depends on the size of the roof, the condition of the existing deck and the complexity of the edges and detailing. As a general guide, GRP systems typically start from around £80 to £100 per square metre. Contact Abel Roofing for a free assessment and accurate quote for your specific job.
In most cases, replacing an existing flat roof with GRP is classed as permitted development and does not need planning permission. Properties in conservation areas or listed buildings may have restrictions. If you are unsure, check with your local planning authority before work starts.
In some cases an overlay is possible, but only if the existing deck is sound, dry and level. If there is any rot, movement or moisture in the substrate, it needs to come out first. Abel Roofing will inspect the existing roof before recommending the right approach.
Yes. GRP is one of the most common choices for garage flat roofs. It handles foot traffic if the roof is accessed, it resists impact and it gives a clean finish that lasts. It is also suitable for roofs with skylights or upstands built in.
Most domestic GRP installations are completed in one to two days. Larger roofs or those with more complex shapes may take a little longer. Abel Roofing will give you a clear timeline before work starts so you know what to expect.
Poor installation is the main cause. If the resin is not mixed correctly, if the deck is not prepared properly or if the topcoat is applied too thin, the roof can crack or delaminate over time. This is why choosing an experienced installer matters. GRP installed well rarely fails.
Yes. Localised damage such as a crack, impact mark or failed edging can be repaired using GRP patching materials. The repair bonds to the existing surface and creates a seamless finish. If damage is widespread, a full replacement may be more cost-effective.
Abel Roofing provides a workmanship guarantee on all GRP installations. The materials also carry a manufacturer warranty. You will receive both in writing before work begins. Ask about guarantee terms when you request your quote.
Yes. GRP can be fitted around roof lights, upstands and penetrations cleanly because it is applied as a liquid and cures in place. This removes the risk of leaks at the joints that can occur with sheet membranes around penetrations.
If the roof is over 20 years old, has been repaired more than once and is still leaking, replacement is usually the better option. Other signs include widespread cracking, soft spots in the deck, persistent damp inside the building and felt that has lifted or pulled away from the edges.
Yes, if insulation is included as part of the installation. A warm roof build-up with rigid insulation board beneath the GRP layer is now standard practice and significantly improves the thermal performance of the property. Abel Roofing can advise on insulation options as part of your quote.
A professionally installed GRP roof improves the condition of the property, removes a known maintenance liability and can improve energy efficiency. Buyers and surveyors view a flat roof with a long-life system and a guarantee as a positive, compared to an old felt roof of unknown age or condition.





