EPDM Rubber Roofing in Feltham
If your flat roof needs replacing or you are building something new, EPDM rubber roofing is one of the most dependable systems available. Abel Roofing installs EPDM across Feltham and the wider Feltham & Hanworth area to a high standard, using materials that are built to perform for decades.
Homeowners across Feltham choose EPDM because it deals with the problems that older flat roofing systems simply cannot. If your current roof is causing you grief, it is worth finding out whether EPDM is the right solution for your residential property.
Were Rated Excellent In The Area
“Repair/replacement of roof”
Job location: GU15
“Complete Roof Replacement”
“This is the second large job Abel Roofing have completed for us in the last 12-months. Same high standard of workmanship and customer service. Cliff and his team are brilliant and we couldn’t recommend them highly enough.”
Job location: GU15
“Replacing flat roof after storm damage”
Job location: SW11
“A first rate job”
Job location: RG27
“Fantastic Service, Fantastic People”
Job location: SW4
What Is EPDM Rubber Roofing in Feltham?
EPDM stands for ethylene propylene diene monomer. That is the technical name for a synthetic rubber membrane used on flat roofs. It comes in large sheets that are bonded to the roof deck, creating a waterproof layer with very few joins or weak points.
It has been used across the UK for decades and has a strong track record. It handles summer heat, Feltham & Hanworth winters and everything in between without cracking or shrinking. That is what makes it one of the most dependable flat roofing materials available for residential property owners in Feltham.
What Does the Installation Process Involve in Feltham?
EPDM roofing is a clean, straightforward installation compared to some other systems. There is no torch, no open flame and no strong fumes involved. The membrane is bonded using adhesive, which makes it suitable for occupied residential property buildings and jobs close to neighbours across Feltham.
The process starts with stripping the existing roof down to the deck and checking for damage underneath. Any rot or weak sections are replaced before anything else goes on. The insulation layer is then fitted, the EPDM membrane is rolled out and bonded flat, and edges, joins and flashings are sealed and checked before the job is signed off.
For most residential property properties in Feltham, the whole installation takes between two and four days. Abel Roofing will give you a clear timeline before work starts so you know exactly what to expect.
Feltham homeowners replacing flat roofs on garages and rear extensions are increasingly choosing EPDM rubber as an alternative to felt, appreciating the 20-plus year design life and the simplicity of the fully bonded single-ply system that can be installed in a single working day.
Get A Free Quote
Take a look at our other Flat Roof To Pitched Roof Conversion Services here:
Why Invest in EPDM Rubber Roofing in Feltham?
A flat roof that is failing will cause problems inside your residential property. Water gets under the membrane, soaks the insulation, reaches the deck and then the ceiling below. By the time you see a damp patch, the damage is already well underway above it.
EPDM is worth investing in because it stops that cycle. One good installation gives you a roof that performs reliably for the next three decades across Feltham and Feltham & Hanworth weather alike. No annual patching, no recurring leaks and no unpleasant surprises after heavy rain.
Abel Roofing is rated 9.91 out of 10 on Checkatrade. We fit EPDM roofs across Feltham to a standard we are prepared to put our name to. You get a written guarantee on the workmanship, manufacturer backing on the materials and a team that turns up on time and keeps you informed throughout.
If your residential property flat roof is leaking, deteriorating or simply at the end of its life, an EPDM replacement is one of the best decisions you can make in Feltham.
Flat Roofing Gallery
🛠️ Our EPDM Rubber Roofing Locations 🛠️
Take a look at our EPDM Rubber Roofing Locations here:
EPDM Rubber Roofing Frequently Asked Questions
EPDM stands for ethylene propylene diene monomer. It is a type of synthetic rubber manufactured into large flexible sheets and used as a waterproofing membrane on flat roofs across Feltham and throughout Feltham & Hanworth.
A properly installed EPDM roof will typically last 25 to 30 years. Some roofs last longer depending on the quality of the installation and how well drainage is maintained. It is one of the longer lasting flat roofing systems available for residential property owners in Feltham.
EPDM generally outlasts traditional felt by a significant margin. Felt systems typically last 10 to 15 years before needing attention, while EPDM can double that. For most residential property flat roofs in Feltham, EPDM is the more cost effective choice across the lifetime of the roof.
Yes. Small splits, punctures or lifted edges can be repaired using EPDM patches and bonding adhesive. The repair blends into the existing membrane and restores the waterproof seal. If damage is widespread or the roof is old, a full replacement will usually be more cost effective than ongoing repairs on your residential property in Feltham.
In most cases, replacing a flat roof on a residential residential property is classed as permitted development and does not need planning permission. If your property is listed or sits within a conservation area in Feltham & Hanworth, there may be additional requirements. Check with your local council before work starts if you are unsure.